Dallas County, Texas
Concrete Coatings and Garage Storage in Farmers Branch, TX
Slabbr offers concrete coatings and garage storage in Farmers Branch, TX, through our Burleson team. Garage coating builds use polyaspartic base and top coats and run $2,650–$4,400 for 440 square feet, from Slabbr One through Ironclad. Most garage coatings take one day.
440 sq ft garage builds: $2,650–$4,400, One through Ironclad
- Coating preparation: diamond ground, never acid etched
- Most garage coatings: one day install, park after 72 hours
- Lifetime residential garage coating warranty
- Written fixed price, no sales visit needed
See your price
Two taps gets you the number. Nobody asks who you are first.
Photo: Diego Ramirez / Pexels
Local conditions
Farmers Branch slabs, specifically
Most of what we coat in Farmers Branch is a strong 1955-1970 mid-century modern stock with Mercer Crossing adding dense new construction since 2016. That matters because slab age tells us what we are walking into before we get there. We work Brookhaven Estates, Mercer Crossing, Valwood Park and Country Club Estates regularly, and the garages in Farmers Branch are two-car attached, many side-entry with the flat-roof carport styling typical of mid-century builders.
Farmers Branch has one of the best-preserved concentrations of 1950s and 1960s mid-century modern homes in North Texas, sitting alongside the Valwood industrial park, one of the oldest and largest industrial districts in Dallas County. Farmers Branch is in Dallas County, population about 37,000.
What we install in Farmers Branch
Every system, priced in the open
Residential
Garage Floor Coating in Farmers Branch
From $6 to $10 per sq ft
Polyaspartic Garage Floor Coating in Farmers Branch
From $8 to $10 per sq ft
Epoxy Flooring in Farmers Branch
From $6 to $12 per sq ft
Metallic Epoxy Floors in Farmers Branch
From $12 per sq ft
Quartz Epoxy Systems in Farmers Branch
From $10 per sq ft
Solid Color Epoxy in Farmers Branch
From $6 per sq ft
Stained and Sealed Concrete in Farmers Branch
From $4 per sq ft
Polished Concrete in Farmers Branch
From $7 to $12 per sq ft
Grind and Seal Concrete in Farmers Branch
From $4 per sq ft
Garage Organization in Farmers Branch
Clear the Floor from $2,150
Garage Slatwall in Farmers Branch
$14 per sq ft of wall
Overhead Garage Storage in Farmers Branch
$399 per 4×8 rack
Garage Cabinets in Farmers Branch
From $3,695 after measure
Outdoor
Commercial and industrial
Commercial Epoxy Flooring in Farmers Branch
From $4 to $12 per sq ft
Warehouse and Industrial Floor Coating in Farmers Branch
From $4 to $9 per sq ft
Auto Shop Floor Coating in Farmers Branch
From $6 to $10 per sq ft
Commercial Kitchen Flooring in Farmers Branch
From $8 to $14 per sq ft
Hangar Floor Coating in Farmers Branch
From $5 to $9 per sq ft
All three builds compared: pricing. How install day runs: our process. What is covered and for how long: the warranty. The standards we prep to: ASTM and ICRI.
Track record
Our crew has earned 150+ five-star reviews coating North Texas floors since 2019
Slabbr is a new name on the truck. The crew, the equipment and the standards behind it have been coating slabs across North Texas for years. Here is what that looks like in practice.
- 150+
- Five-star reviews earned by this crew
- coating North Texas floors since 2019
- 7
- Years coating North Texas slabs
- same crew, same equipment
- Lifetime
- Warranty on interior floors
- attached to the job, no registration
- Identical
- Price on the quote vs the invoice
- crack repair already included
Want to talk to someone who has stood on one of our floors? Ask on the call and we will put you in touch. Reach us at (903) 243-9525.
Straight answers
Coating a floor in Farmers Branch: common questions
Does Slabbr coat floors in Farmers Branch, TX?
Yes. Our crews reach Farmers Branch in about 42 minutes, so a Farmers Branch floor is a normal working day and not a road trip. We offer 21 coating, concrete-care and garage-storage services with published pricing.
How much does a garage floor coating cost in Farmers Branch?
$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Farmers Branch. Crack and joint repair is included in all three.
Which Farmers Branch zip codes do you serve?
75234, 75244, all in Dallas County. Service coverage includes these neighborhoods in Farmers Branch: Brookhaven Estates, Mercer Crossing, Valwood Park, Country Club Estates, Town North Estates, Crestbrook Estates, Farmington Park North.
What are Farmers Branch slabs usually like?
Housing in Farmers Branch is a strong 1955-1970 mid-century modern stock with Mercer Crossing adding dense new construction since 2016. Building age is only background information. We inspect the actual slab, moisture and existing finish before confirming preparation.
What kind of garages does Farmers Branch have?
two-car attached, many side-entry with the flat-roof carport styling typical of mid-century builders. Farmers Branch has one of the best-preserved concentrations of 1950s and 1960s mid-century modern homes in North Texas, sitting alongside the Valwood industrial park, one of the oldest and largest industrial districts in Dallas County.
Do you charge extra to drive to Farmers Branch?
No. Our crews reach Farmers Branch in about 42 minutes, so a Farmers Branch floor is a normal working day and not a road trip. We do not add a travel premium, or quote higher in the Farmers Branch zip codes with bigger houses.
Do you install epoxy in Farmers Branch?
No. Our coating systems use polyaspartic base and top coats. Polishing, staining and sealing, and cleaning are separate services with their own methods.
How long does a garage coating install take in Farmers Branch?
Most garage coatings take one day on the slab. Grinding, crack repair and coating all happen in the same visit. Walk on it after 24 hours in Farmers Branch, park on it after 72.
Is a Farmers Branch floor warrantied?
Residential garage coatings in Farmers Branch carry a lifetime warranty against delamination, peeling and flaking for as long as you own the home. Exterior work carries 10 years and commercial 2 years.
My Farmers Branch floor already has a failed coating. Can you fix it?
Yes. We grind the old coating off first. Removal adds 1.75 per square foot to the Farmers Branch quote and is priced up front rather than discovered on install day.
Who runs Farmers Branch jobs?
The Burleson shop. That number is (817) 381-9385, and it is the same number listed on that location's Google Business Profile.
Straight answers, real numbers
Homework before you hire in Farmers Branch
Aug 25, 2026
Epoxy Floor Peeling After a Year: Whose Fault It Is and What Your Options Are
Sep 11, 2026
Black Mastic Under Old Tile: The Asbestos Warning Nobody Gives You
Sep 10, 2026
Never Fill Garage Floor Expansion Joints Rigid Before Coating
Sep 9, 2026
Polyurea vs Polyaspartic: The Naming Confusion, Explained Neutrally
What we install in Farmers Branch
- Garage Floor Coating in Farmers Branch
- Polyaspartic Garage Floor Coating in Farmers Branch
- Epoxy Flooring in Farmers Branch
- Metallic Epoxy Floors in Farmers Branch
- Quartz Epoxy Systems in Farmers Branch
- Solid Color Epoxy in Farmers Branch
- Stained and Sealed Concrete in Farmers Branch
- Polished Concrete in Farmers Branch
- Patio and Pool Deck Coating in Farmers Branch
- Driveway Coating in Farmers Branch
- Commercial Epoxy Flooring in Farmers Branch
- Warehouse and Industrial Floor Coating in Farmers Branch
- Auto Shop Floor Coating in Farmers Branch
- Commercial Kitchen Flooring in Farmers Branch
- Hangar Floor Coating in Farmers Branch
- Grind and Seal Concrete in Farmers Branch
- Pressure Washing in Farmers Branch
- Garage Organization in Farmers Branch
- Garage Slatwall in Farmers Branch
- Overhead Garage Storage in Farmers Branch
- Garage Cabinets in Farmers Branch
See your number in about a minute
Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Farmers Branch.