Dallas Fort Worth
Garage Cabinets in Dallas Fort Worth
Slabbr installs modular garage cabinets in Dallas Fort Worth. A NewAge Bold seven-piece starter configuration with worktop starts at $3,695 installed. Exact modules, finish and worktop are confirmed after measure; wall storage is separate. We check mounting support, door swings and parked vehicles. Floor coating can share the schedule, with cabinets installed after the floor is ready.
NewAge Bold starter from $3,695 after measure
- Published installed prices
- Layout checked around your vehicles
- Wall and ceiling framing checked before mounting
- Floor and storage on one coordinated schedule
See your price
Two taps gets you the number. Nobody asks who you are first.
Installed pricing
Choose the scope before the visit
NewAge Bold starter
From $3,695
Seven-piece cabinet configuration with worktop and standard installation. Exact SKU, modules and finish confirmed after measure. Wall storage is separate.
Working Garage
From $7,950
Larger cabinet and storage buildout, individually specified after measure. Cabinet run, work surface and wall storage itemized in the quote.
Prices are before applicable tax. Products and standard installation are included in the stated storage scope. Floor coating is separate. Any additional coverage, accessories, repairs, reinforcement or extra trips must be listed before you approve the quote.
Your quote identifies the supplied products and installation terms. Manufacturer resources: Proslat, FLEXIMOUNTS, SafeRacks and NewAge Bold. Storage warranties are separate from Slabbr floor-coating warranties.
The spec
What you are actually buying
- NewAge Bold starter
- Seven-piece configuration with worktop from $3,695; exact SKU after measure
- Mount
- Wall-secured or supported as the exact module requires
- Sequence
- Floor first when both are on the ticket
- Install time
- Confirmed after measure and coordinated with any floor work
Right for
Where this system belongs
- A full wall that needs doors, not hooks
- Workbenches that have to survive Texas heat
- A measured modular cabinet layout with a usable work surface
When this is the wrong call
A custom millwork kitchen in the garage, or cabinets that have to hide a lift post, is outside this price. We will measure and say so.
NewAge Bold starter starts at $3,695 after measure
The NewAge Bold starter includes a seven-piece cabinet configuration with worktop and standard installation from $3,695. Wall storage is separate. Working Garage remains a larger, individually specified cabinet and storage buildout from $7,950. The final quote identifies the cabinet modules, run length, drawers, worktop, finish, accessories and mounting. The starting price is visible now; measurement determines the configuration that fits your garage.
A long wall of doors is not always more useful than a shorter run with well-placed drawers and an open work surface. Start with the largest contents and how you use them. Tall storage can suit long equipment, drawers keep smaller tools accessible, and open wall storage can put frequently used items within reach. We plan these functions before filling every available inch.
Material and hardware selection belongs in the written specification. Shelf and drawer load ratings, cabinet depth, backing, mounting requirements and worktop use should match what you intend to store. We use modular garage cabinet lines we can source and install. NewAge Bold is our starter cabinet line; we confirm the exact modules, finish and worktop before ordering.
Vehicle doors, cabinet depth and mounting
The usable run length is not simply the distance between two corners. We check the house entry, garage door tracks, windows, outlets and equipment access. Then we look at the parked vehicles with doors open. A cabinet drawer needs room to extend while someone stands in front of it; a tall cabinet needs room for its door to open.
Wall-mounted components need suitable structural support. Raising cabinets above the slab can help with cleaning access, but the selected cabinet must be designed for that mounting method. We will not hang a floor-standing module just because a raised cabinet looks better. The chosen components, wall and fixings must work together.
If you already own cabinets, send the model and installation instructions before scheduling. That is a separate assessment and quote, not an automatic NewAge Bold starter package. Existing units may need different support, and missing hardware or unknown load ratings may change whether we can install them. Photos of the boxes and wall are useful starting information.
Compare installation quotes on the same scope
An online price can mean a box of hardware, labor to install a product you already own, or the product and installation together. Slabbr's published storage prices describe installed work in the stated scope. Before comparing two numbers, check whether both include the same products, coverage and accessory selection. A lower labor-only price is not the same offer as a supplied and installed system.
For wall storage, compare the number of square feet actually covered, the panel system, how it mounts and the list of accessories. A full wall and a short tool section cannot be compared by calling both of them a two-car package. For overhead storage, compare rack dimensions and count, the permitted installation method and the exact model's capacity. Do not compare capacity figures without also checking how the products are supported.
For cabinets, compare the run's modules and depths, drawer count, worktop and installation details. A long run of basic doors is a different purchase from a shorter tool station with drawers and a work surface. Neither is automatically the right choice. Use the contents you need to store and the room left around the cars to judge the arrangement.
Finally, separate optional work from the core installation. Floor coating, clearing belongings, taking down old units, wall repairs and extra accessories should not disappear inside a vague makeover total. Ask for a written breakdown and the installation sequence. That lets you keep a useful first phase and decide later whether cabinets or another wall of storage are worth adding.
Plan the storage around the parked cars
Start with the garage doing its main job. Park the vehicles where you use them, open the doors and mark the walking route to the house. Include a tailgate, hatch or charging cable if one needs space. A cabinet that fits an empty wall can still make the garage awkward to use. A bike hanging at mirror height can take more useful space than its hook suggests.
Next, group what you want to keep by how often you reach for it. Daily-use tools and sports equipment belong within reach. Seasonal bins can go overhead if the rack and ceiling support them. Items that need doors can go in cabinets. Measure the largest objects first: the mower, ladder, cooler, tool case and storage bins. Their dimensions matter more than a photograph of someone else's finished garage.
Send photos of the walls and ceiling, including the open garage door. Show outlets, windows, the house door, attic access, equipment and existing cabinets. Tell us about a lift or planned changes. Photos help us prepare; we still confirm mounting and clearance at your garage before committing to the final layout.
A written scope before installation
Published pricing gives you a starting decision without a sales visit. The written scope then identifies what that price covers in your garage. Look for measured wall coverage, rack count and size, cabinet configuration, accessories and any separate work. An installed price should describe an installed result, not leave you guessing which parts you must buy.
Tell us if existing storage needs removing, walls need repair or belongings need moving. Household sorting, donation runs, electrical alterations and room conversions are not automatic parts of a storage installation. Address that work before scheduling so the mounting area is accessible and the quote reflects the job you actually need.
Product selection also belongs in the scope. We use dealer-sourceable PVC wall systems, overhead racks and modular garage cabinet lines. The exact model determines compatibility, fixing requirements and load limits. We will not substitute a general claim about a brand for the installation instructions of the product going into your garage.
Garage floor and organization on one schedule
Slabbr can install the storage and coat the garage floor as one coordinated job. Floor coating is priced separately from Clear the Floor, slatwall, overhead racks and NewAge Bold starter unless your written scope explicitly includes it. The crew plans the sequence before you empty the garage so you know when vehicles and stored items need to move.
When both are ordered, the coating goes down before the new storage. We use polyaspartic floor systems. Storage installation follows when that floor is ready for ladders, fasteners, cabinets and installation equipment. Walking access and readiness for cabinet work are different milestones; your job schedule sets them out. A coordinated schedule does not mean every part finishes in a single day.
An existing coated floor does not have to be replaced to add storage. Tell us its condition and when it was installed. The storage layout should protect access and allow the floor to be cleaned. If you are considering coating later, discuss it now so cabinet positions do not create unnecessary removal work.
Handover, adjustments and warranty terms
Before loading the system, confirm the approved locations and the limits for the exact products installed. Keep the product instructions. A rack's advertised capacity does not tell you what any ceiling can hold, and one hook's capacity does not apply to all slatwall accessories. Store items within the selected product's limits and use the recommended load distribution.
Check that doors, drawers, vehicle doors and the garage door operate without interference. Keep access to equipment and utilities clear. A flexible wall system can be rearranged, but changing the mounting structure or adding a new overhead load requires another check. A layout that works today should not depend on remembering to squeeze past a cabinet every morning.
Storage warranty terms are supplied with the selected products and installation scope. We do not apply the floor's lifetime residential interior warranty to panels, racks, cabinets or hooks. If your project includes a coated floor, its separate terms remain lifetime residential interior, 10 years exterior and 2 years commercial. Confirm both scopes before approving the work.
Track record
Our crew has earned 150+ five-star reviews coating North Texas floors since 2019
Slabbr is a new name on the truck. The crew, the equipment and the standards behind it have been coating slabs across North Texas for years. Here is what that looks like in practice.
- 150+
- Five-star reviews earned by this crew
- coating North Texas floors since 2019
- 7
- Years coating North Texas slabs
- same crew, same equipment
- Lifetime
- Warranty on interior floors
- attached to the job, no registration
- Identical
- Price on the quote vs the invoice
- crack repair already included
Want to talk to someone who has stood on one of our floors? Ask on the call and we will put you in touch. Reach us at (903) 243-9525.
Straight answers
Garage Cabinets: the questions we get asked
How much does garage cabinets cost with Slabbr?
Our published price is from $3,695 after measure for NewAge Bold starter. Installation is included in that stated scope. Extra coverage, accessories or work outside the package must appear in the quote before you approve it.
What does the $3,695 starting price buy?
The NewAge Bold starter covers a seven-piece cabinet configuration with worktop and standard installation. The exact SKU and included modules are confirmed after measurement. Wall storage and floor coating are separate. Cabinet sizes, drawers, countertop, finish, accessories and mounting are itemized in the final scope.
Are these custom cabinets or modular cabinets?
We plan modular garage cabinets around your measured space. Custom garage storage describes the layout and component selection; it does not mean bespoke millwork. Run length, available modules, drawer count and the work surface determine the finished arrangement and price.
Will cabinets prevent me from parking?
We measure the vehicle footprint, open doors and the walking route into the house before selecting cabinet depth. We also check access to outlets, utilities and equipment. Drawers and cabinet doors need usable space in front of them, not just enough space to close the garage door.
Can you install cabinets I already own?
Send the model, dimensions, mounting instructions and photos of the wall. We can assess the installation separately. Do not assume an owner-supplied set is covered by NewAge Bold starter pricing or suitable for wall mounting; some modules must be supported from the floor.
Can floor coating and organization use one crew and schedule?
Yes. Slabbr can coordinate the polyaspartic floor and storage installation on one job. We coat the floor first when both are ordered, then mount storage when the floor is ready for ladders and equipment. Your schedule states the access and cure requirements; a combined job is not a promise of same-day completion.
What should I send for a quote?
Send your city, garage bay count, photos of each installation wall and ceiling, wall length, and the items you want to store. Include existing cabinets, a vehicle lift, low ceilings and any planned floor work. Those details let us check the package against the actual space.
What warranty applies to storage?
Storage terms depend on the selected products and written installation scope. Ask for those terms before approving the quote. The floor warranty does not cover racks, slatwall, hooks or cabinets. If we coat a floor on the same job, its separate published floor warranty applies.
When is garage cabinets the wrong choice?
A custom millwork kitchen in the garage, or cabinets that have to hide a lift post, is outside this price. We will measure and say so.
Straight answers, real numbers
Before you buy: reading on garage cabinets
Cabinets by city
- Cabinets in Burleson
- Cabinets in Crowley
- Cabinets in Joshua
- Cabinets in Alvarado
- Cabinets in Cleburne
- Cabinets in Keene
- Cabinets in Venus
- Cabinets in Godley
- Cabinets in Rendon
- Cabinets in Everman
- Cabinets in Forest Hill
- Cabinets in Kennedale
- Cabinets in Mansfield
- Cabinets in Benbrook
- Cabinets in Fort Worth
- Cabinets in Arlington
- Cabinets in Grand Prairie
- Cabinets in Midlothian
- Cabinets in Waxahachie
- Cabinets in Grandview
- Cabinets in Cresson
- Cabinets in Aledo
- Cabinets in Willow Park
- Cabinets in Frisco
- Cabinets in McKinney
- Cabinets in Allen
- Cabinets in Celina
- Cabinets in Prosper
- Cabinets in Little Elm
- Cabinets in Aubrey
- Cabinets in Anna
- Cabinets in Melissa
- Cabinets in Garland
- Cabinets in Carrollton
- Cabinets in The Colony
- Cabinets in Saginaw
- Cabinets in North Richland Hills
- Cabinets in Hurst
- Cabinets in Haltom City
- Cabinets in White Settlement
- Cabinets in Cedar Hill
- Cabinets in Farmers Branch
- Cabinets in Pilot Point
- Cabinets in Van Alstyne
Related services
See your number in about a minute
Pick what we are installing and see the published package price. Wall coverage, rack placement and cabinet scope are confirmed before installation.




