Skip to content

TODAY ONLY: Save $250 when you call or get your quote by text

Ends midnight CT

Call (903) 243-9525
Slabbr

Ellis County, Texas

Concrete Coatings and Garage Storage in Red Oak, TX

Slabbr offers concrete coatings and garage storage in Red Oak, TX, through our Burleson team. Garage coating builds use polyaspartic base and top coats and run $2,650–$4,400 for 440 square feet, from Slabbr One through Ironclad. Most garage coatings take one day.

440 sq ft garage builds: $2,650–$4,400, One through Ironclad

  • Coating preparation: diamond ground, never acid etched
  • Most garage coatings: one day install, park after 72 hours
  • Lifetime residential garage coating warranty
  • Written fixed price, no sales visit needed

See your price

Two taps gets you the number. Nobody asks who you are first.

About 440 sq ft. The most common garage in Texas.. No sales visit required to see the number.

Photo: Diego Ramirez / Pexels

Local conditions

Red Oak slabs, specifically

Red Oak housing is 1990s and 2000s half-acre subdivisions with a fresh wave of builder product along the I-35E frontage since 2018, which sets what the prep day looks like. In Oak Creek Ranch, Country Ridge Estates, Shiloh Downs and Waterview Farms the pattern is consistent enough that we can usually quote the grind accurately from the year the house was built. Garages here are two and three-car side-entry garages on the larger 1990s lots, two-car front-entry on newer builder lots.

Red Oak sits on the I-35E corridor between Dallas and Waxahachie and has absorbed a run of new distribution buildings at the Ovilla Road interchange, with the surrounding Blackland Prairie clay dictating post-tension slabs on most new construction. Red Oak is in Ellis County, population about 15,500.

Track record

Our crew has earned 150+ five-star reviews coating North Texas floors since 2019

Slabbr is a new name on the truck. The crew, the equipment and the standards behind it have been coating slabs across North Texas for years. Here is what that looks like in practice.

150+
Five-star reviews earned by this crew
coating North Texas floors since 2019
7
Years coating North Texas slabs
same crew, same equipment
Lifetime
Warranty on interior floors
attached to the job, no registration
Identical
Price on the quote vs the invoice
crack repair already included

Want to talk to someone who has stood on one of our floors? Ask on the call and we will put you in touch. Reach us at (903) 243-9525.

Straight answers

Coating a floor in Red Oak: common questions

Does Slabbr coat floors in Red Oak, TX?

Yes. We are 35 minutes from Red Oak, running out of our shop in Burleson. We offer 11 coating, concrete-care and garage-storage services with published pricing.

How much does a garage floor coating cost in Red Oak?

$2,650 on the One build, $3,520 on Prime and $4,400 on Ironclad for a 440 square foot 2-car garage in Red Oak. Crack and joint repair is included in all three.

Which Red Oak zip codes do you serve?

75154, all in Ellis County. Service coverage includes these neighborhoods in Red Oak: Oak Creek Ranch, Country Ridge Estates, Shiloh Downs, Waterview Farms, Hickory Creek Estates, Estates of Cole Manor, Woods of Red Oak.

What are Red Oak slabs usually like?

Housing in Red Oak is 1990s and 2000s half-acre subdivisions with a fresh wave of builder product along the I-35E frontage since 2018. Building age is only background information. We inspect the actual slab, moisture and existing finish before confirming preparation.

What kind of garages does Red Oak have?

two and three-car side-entry garages on the larger 1990s lots, two-car front-entry on newer builder lots. Red Oak sits on the I-35E corridor between Dallas and Waxahachie and has absorbed a run of new distribution buildings at the Ovilla Road interchange, with the surrounding Blackland Prairie clay dictating post-tension slabs on most new construction.

Do you charge extra to drive to Red Oak?

No. We are 35 minutes from Red Oak, running out of our shop in Burleson. We do not add a travel premium, or quote higher in the Red Oak zip codes with bigger houses.

Do you install epoxy in Red Oak?

No. Our coating systems use polyaspartic base and top coats. Polishing, staining and sealing, and cleaning are separate services with their own methods.

How long does a garage coating install take in Red Oak?

Most garage coatings take one day on the slab. Grinding, crack repair and coating all happen in the same visit. Walk on it after 24 hours in Red Oak, park on it after 72.

Is a Red Oak floor warrantied?

Residential garage coatings in Red Oak carry a lifetime warranty against delamination, peeling and flaking for as long as you own the home. Exterior work carries 10 years and commercial 2 years.

My Red Oak floor already has a failed coating. Can you fix it?

Yes. We grind the old coating off first. Removal adds 1.75 per square foot to the Red Oak quote and is priced up front rather than discovered on install day.

Who runs Red Oak jobs?

The Burleson shop. That number is (817) 381-9385, and it is the same number listed on that location's Google Business Profile.

Every question we get asked, answered →

See your number in about a minute

Pick what we are coating, pick the size, get a price. No home visit needed to see it and no salesperson attached to it, anywhere in Red Oak.

Call now